Presentation: Cartridge Heater MAXIWATT(R), with more than 50 years of experience as a cartridge heater manufacturer. Certification: CE, UL (under request), ISO: 9001 Material: Stainless Steel 304, Nickel Rod, Fiberglass Cables (250 mm). Shipping: We ship your resistor within 24 hours for you to receive it, at the latest 48 hours after placing your order. Utilities: Cartridge heaters are used in many applications, such as sealing bars, dip tank heating, hot melt adhesives, fluid heating, etc. If you have any questions, please do not hesitate to contact us.

Electrical resistance of maximum durability. Cartridge Heater with high compressed load. Installation Indicate with symbols the warning of hot surfaces. Store as protected from moisture as possible. Cut off the total current to the machine or mold. Check that the machine or mould is at room temperature. Introduction without any type of anti-seize paste. Holes with H7 tolerance only Attach regulation and cutting systems (thermocouples and regulators) Insert 100% of the cartridge’s sheath length. Do not insert the connection cable inside the hole Protect the cables and connection input from: shocks, splashes and excess material . Do not pick up or carry the resistor on the cable. Keep the cable away from the heat source and protected from it. Do not repair damaged cables Replace them with new ones identical to the original ones. Indicate and send the working conditions (vibration, shocks, humid environments) in writing before accepting the order. Never leave in operation without qualified human presence. All exposed parts are compulsory for the safety of persons and goods. Never connect outdoors.