【Application】This small exposure unit mainly used for exposure small screens,printing plate,hot stamping. The exposing area is 1812inch. 【With Timer】The machine adopts timer to set the exposing time. After reach the exposing time,the machine automatically turns off. The timer also has automatic memory function, set in once, time will save. 【LED Lights】There are 4 pieces of 15W LED light tubes. It can be used for about 50,000 hours. 【Tempered Glass】Equipped with 8mm tempered glass plate which is resistant to friction. Even if the glass is broken,the glass shards are not sharp so that to ensure the safety of operators. 【With Sponge and Shading Cloth】Equipped with a high density sponge(7.911.8*2.4inch) used for press the film more closely to improving exposuring performance. A piece of shading cloth is also included and you can use it cover the machine to aviod hurting operator’s eyes.

Parameter Exposure size:1812inch Voltage:110V Power:60W Wave length:395nm Machine size:20147inch Package size:2216*9inch Package weight:30lbs Methods of using the timer 1.Before using, please press the “C” button to reset, the display shows 00:00 00 and it is flashing state. 2.Press the “hour” and “minute” and “second” button separately to set the countdown of the electrify time, the display shows “ON” 3.Press the “start/pause” button to start the countdown. For example At first press the “C” button to remove the original set ; Then press “minute” set to"5"; press “seconds” set to “30”; Then press the “start/pause” to start the countdown, lamp open; After five minute 30 seconds countdown , plate burning machine tube closed. This setting do not need to change, it is automatically saved. When the machine starts again, the countdown is still 5 minutes and 30 seconds. Item Number 010038